The process of making T-shirts with flex material

This process applies to flex that can not be stacked. There are several types of flex that can be piled, so the design and cut more freely as they pleased ('ve often try to use a digital power flex and velflex)

1. Design

Separate each color on each layer. perwarna export to *. eps or *. dxf or *. plt, prefer eps. This is because using a cutting machine that only accepts vector files eps, dxf or plt.

2. cutting

Cutting per color (do not forget the cutting mirror image).

3. Peel

Unplug or remove unwanted parts.

4. Put a face t-shirts and press

Position the most important layer first (the biggest and the surrounding objects, in this case is an example of the black. Press on temperature and time read the instruction manual of each flex, to flex YOfin bung on my machine using 160 degrees and 15 seconds (since this is a multi-layer case, then reduced it down to 10-12 seconds because it will be several times the press).

5. Peel

Unplug or remove the plastic.

6. Position the second layer

Place and position the second color. Because the use of translucent plastic ma easily monitored directly by the eye (if you want to use precision registration mark).

7. Press

Press with the same temperature, cover the first layer (in this case is that the color black) by using a heat resistant plastic. His paper can be used a plastic backing.

8. Peel

Open his paper backing.

9. Position the layer into three

Position the layer into three (in this case white).

10. Press

Press back and cover the black and red with heat resistant plastic.

11. Peel

Unplug his paper backing.

12. Finished

It's finished, if there are some details that you want to add as in the case pasa example is the eyes, nose and writing) can be pressed again.

tips:
* To use a multi-layer method, especially if the flex can not be stacked, so separate each color. Make the most of the first layer and cover the image area made the bleeding. That is slightly larger than the image to keep any parts are missing or not closed neatly.
* When the press can be reduced from 15 seconds instructionnya suppose it should be reduced to 10-12 seconds. This is due to be pressed repeatedly so that flex not be melted too

You can get this media for personal T-Shirt here for example using Chemical Heat Transfer

Jika Bersedia, Sukai artikel ini, dengan cara Klik icon Google Plus, Shared Tweeter, dan Like Facebook ! Guna Membantu Kemajuan Blog Ini

Artikel Terkait